Get Starter Ready for Dough: If you are making a full batch of bread, you will need 300 grams of active fed starter to go into your dough. For this amount, I do a 1:3:3 feeding so that my starter is usually ready to go into the dough at about the 5 hr mark and can be used until about the 10 hr mark after feeding. I take 50 grams starter and feed that with 150 grams flour and 150 grams water to give me 350 grams total starter. 300 grams will go into the dough with 50 grams leftover for the next days feeding. For a half batch, you can use half the amount of these feedings.
Mix Dough: In a large mixing bowl measure out your slightly warm water. Add your starter, bread flour, whole wheat flour, oil or butter, honey, and salt on top. I like to start mixing the dough with a silicone spatula or a dough whisk first. Once the dough is starting to come together, use clean hands to thoroughly mix the dough until all of the ingredients are very well incorporated and there are no dry patches of flour. This will take about 2-3 minutes of mixing to make sure it is well combined. Cover the bowl with plastic wrap, or a shower cap and let sit at room temperature (72-75 F, 22-23 C) for 30 minutes.
Stretch and Folds: Over the 2 hours perform 4 rounds of stretch and folds about every 30 minutes. The timing between the rounds does not need to be exact. Drizzle a tiny bit of oil over the dough after the last stretch and fold and cover it with plastic wrap or a shower cap to prevent it from drying out.
Retard Dough (optional): If you would like to bake your bread the same day, you can skip this step. However, if you would like, you can refrigerate your dough at this point to increase flavor, sourness, and provide some flexibility with baking time. to do this, place your dough in the refrigerator for at least 24 hours and up to 4 days.
Bulk Ferment: If you did not retard your dough, let it continue sitting at room temperature after your last round of stretch and folds for about 3 hours. If you did retard your dough, bring it out of the fridge and let it sit out for about 5-6 hours to finish bulking. Your dough will likely look like it hasn't risen much or at all when you first take it out of the fridge. You know bulk is finished when the dough is full of air and is rounding on the sides of the bowl.
Shaping: Oil your 8.5 x 4.5" (22 x 11 cm) loaf pans. Turn your dough out onto your very lightly floured work surface. Divide the dough in half if you made a full batch. Shape the dough into a tight sandwich loaf. Transfer the dough to the loaf pan, seam side down. Gently press down on the dough to ensure it is evenly filling the pan and that no air pockets are trapped inside the dough.
Proof: Cover the pans with plastic wrap or a shower cap and let proof until the dough begins to crown the pan and is full of air. This should take around 2 ½ hours at a room temperature of about 72 F (22 C).
Prepare Oven: About 30 minutes before baking, prepare your oven. Place an oven rack in the center position and another in the bottom of the oven. On the bottom rack, place a roasting pan or other metal pan in the oven and fill it with about 2 cups (480 ml) of water. Set a baking stone on the middle rack. Preheat the oven to 400 F (200 C).
Bake: If you have a water spray bottle, spray the tops of the proofed loaves with water. Transfer the loaves onto the preheated baking stone or sheet pans and bake for 15 minutes with the pan of water in the oven. After 15 minutes, very carefully remove the pan of water from the oven. Continue baking for 15-20 more minutes until the loaves are golden grown and sound hollow when thumped.
Cool: Transfer the baked loaves into a cooling rack and gently tip out of the pans. Allow to cool completely before slicing. Cool a minimum of 2 hours before slicing.
Store: After sliced, I keep my sandwich bread cut side down and unwrapped in my bread box.
