Weigh the eggs (cracked) in a small bowl. If the weight is less than 165 g, use olive oil to make up the difference.
Add the sourdough starter to the eggs; whisk thoroughly to combine.
Add the flour to a food processor fitted with a metal blade. Add the egg mixture.
Process the ingredients (no need to pulse) until a dough forms, about 10-15 seconds. If the dough doesn’t form into a ball, and looks “crumbly” it’s OK. Unplug the food processor and pinch the dough together; if it sticks, it’s fine.
Remove the dough to your work surface. Form into a rough ball. Cover with an upturned bowl and let rest for 10 minutes before kneading. It will be easier to work with.
After resting, knead the dough (see video at 1:50 mark). Do this by pushing the heel of your hand into the dough, and then turning the dough over itself. Repeat this technique several times, in a continued rocking motion, until a smooth ball forms, about 1-2 minutes. If the texture is sticky as you knead the dough, add a sprinkle of flour. When finished, wrap the dough very tightly in plastic wrap.
Now the dough needs to rest. Choose a fermentation option: for a same day dough, rest at room temperature (68- 75 F) for 1 hour. Alternatively, to maximize fermentation and digestibility, rest at room temperature for 1-2 hours, and chill overnight, up to 24 hrs. Whichever option you choose, the dough must be wrapped tightly; it will rise slightly. Note: before rolling, chilled dough must rest for 30 minutes to 1 hour at room temperature. Otherwise, it will be too stiff.
Set up your station: Dust your work surface, a sheet pan, and the pasta machine with semolina flour to prevent sticking.
Cut the dough into 4 equal pieces; flatten one piece into a thin 6-8-inch oval disc (re-wrap the remaining pieces so they don’t dry out). Use a rolling pin.
Send the disc through the roller on the lowest/widest setting. This is “#1” on the Kitchen Aid attachment displayed above. Now, send it through again. Note: if using a pasta machine, refer to their specific instructions for rolling the dough. The settings are different, but the rolling process is the same.
Continue to roll the dough through settings #2-4 (2x on each setting) for spaghetti, fettuccine, pappardelle and tagliatelle. For homemade ravioli, the dough needs to be thinner- go up to #5. The higher the number, the thinner the dough will become. That’s the goal. The pasta sheet is ready when it’s slightly translucent and you can see your hand underneath.
When finished, fold the pasta sheet in half, place onto a tray and cover.
Repeat the rolling process for the remaining 3 pieces of dough.
Before cutting: I like to semi-dry or “cure” the pasta sheets ever so slightly. This gives the cut pasta strands a more firm and “leathery” finish, rather than a soft and doughy feel (this helps to prevent the strands from sticking together later on).
To semi-dry: Hang the pasta sheets over the back of a chair or on a rod for about 5-15 minutes. Keep your eye on the time; you don’t want the sheets to dry out completely. Touch them occasionally. You will feel the difference in texture as time goes by.
To cut: Take a pasta sheet and cut in half. Send it through the cutter attachment. I used the spaghetti shape above.
Dust the pasta noodles liberally with semolina flour to prevent sticking- don’t skimp here. Arrange strands loosely on a tray.
Repeat the cutting process for the remaining pasta sheets.
