Liquid Soap From Scratch
  1. Weigh out all of your fats and putting them in the bottom of a slow cooker or an instant pot to melt together.

  2. Weigh out the water and glycerin together in one Beaker.

  3. In a separate Beaker weigh out the potassium hydroxide.

  4. Add the potassium hydroxide to the water.

  5. With a hand mixer add your lye solution to your fat solution and mix until it becomes a thick paste (trace).

  6. Switch to a spatula and mix.

  7. Keep this at about 165 to 175 for the next several hours, mixing every 1 to two hours.

  8. To test, add a little glob to a container of really hot water and mix that up. If the solution in the bottom once it settles is clear then it is ready.

  9. Store half of this in a glass jar for later.

  10. Add a gallon of water to the other half left in the cooker.

  11. Stir this a few times before going to bed and keep this on very low overnight.

  12. Dilute it by half typically and add a splash of essential oil to make it smell great.

CourseCrafting

Diets🌱Vegan🌾Gluten-free...

CategorySoap

CuisineHomemade

Occasions📆Everyday🏠Homemade

Season🔁Year-round

DifficultyMedium ⏰ 2h

Loading...